Loading...
Notes:
·Password protection for the Direct Connect feature
will only function if the Supervisor Level
Password has been defined (see Section 5.4.)
·If the Supervisor Mode has been disabled at the
Network Port (Network Configuration Menu, Item
11 = "Deny"), then the Port Password must be
entered in order to establish a connection to this
port. If the Port Password is not defined, the
connection will be refused.
·If the Supervisor Mode is enabled at the Network
Port (Network Configuration Menu, Item 11 =
"Permit"), then either the Supervisor Password or
the Port Password may be entered in order to
establish the direct connection.
8.2.3. Connecting to an RS232 Port using
Direct Connect
The Direct Connect TCP port numbers are as follows:
1. Standard Telnet Connections: When standard Telnet
Protocol is used, the CMS will respond to all IACs.
a) CMS-8 Units: TCP port numbers 2101 through 2108
correspond to RS232 Ports 1 through 8 respectively.
b) CMS-16 Units: TCP port number 2101 through 2116
correspond to RS232 Ports 1 through 16 respectively.
2. Raw Socket Mode Connections: When Raw Socket Mode
is used, data is always sent "As Is", and command echo is
always enabled.
a) CMS-8 Units: TCP port numbers 3101 through 3108
correspond to RS232 Ports 1 through 8 respectively.
b) CMS-16 Units: TCP port numbers 3101 through 3116
correspond to RS232 Ports 1 through 16 respectively.
8-4
CMS-16 / CMS-8 User's Guide
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com