5.6. Copying Parameters to Several
RS-232 Ports
The /CP command (Copy Port Parameters) provides a convenient
means for selecting similar parameters for all or several CMS
RS-232 ports.
When the /CP command is invoked, the unit will display a menu
which allows you to select parameters, and then copy them to all
or several CMS RS-232 ports. The Copy Port Parameters menu
can be used to set all parameters for the specified port(s), or
define only a select group of parameters for the desired ports.
·The /CP command will not copy parameters to the
Network Port.
·The /CP command is only available in Supervisor
·The Copy Port Parameters Menu will not display
the Port Password. This field will read either
“undefined” or “defined”, depending upon whether
or not the Port Password has been specified.
·The /CP command cannot be used to set Ports 1
and 2 to Passive Mode or Buffer Mode (Port Mode,
Item 7).
·The /CP command cannot be used to disable the
Supervisor Mode at Ports 1 and 2 (Supervisor
Mode, Item 8).
Figure 5.5: The Copy Port Parameters Menu
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com