ÂPower Switch
ÃRS232 PORTS: For connection to console ports on target
devices. Standard DB9 connectors configured as DTE
ports. The RS232 ports are similar to a serial port on a PC.
When connecting a modem, use a standard serial cable.
When connecting a PC or other DTE device use a null
modem cable.
·Ports 1 and 2 are System Setup Ports. Note that
Supervisor Level command access cannot be disabled at
these ports.
·Ports 1 and 2 can either be connected to a PC or modem.
Connection to a modem allows control by a remote PC.
ÄOption/SetUp Switches: A bank of eight DIP switches,
which set the default baud rate, handshake, message type,
and duplex mode. Switch functions are described in detail
in Section 4.2.
Unit Description
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com