Loading...
60
INSTALLATION SETTINGS
VOLUME SETTINGS
The ZR-4630 has three useful volume features with customizable settings. The following is a list of the three
volume features along with their default values and a description of their purpose.
Maximum Turn ON and Source Change Volume Level
Maximum Turn ON and Source Change Volume prevents a zone from playing too loudly when it is first turned
on or if the zone changes the currently selected source.
When a zone is turned ON individually, it will always turn ON to its last volume setting unless the zone's last
volume setting is greater than the Maximum Turn ON and Source Change Volume Setting. When greater, the
zone will turn ON to the Maximum Turn ON and Source Change Volume level set in the ZR-4630's memory.
When a zone selects a new source, the volume setting does not change unless the zone’s current volume set-
ting is greater than the Maximum Turn ON and Source Change Volume Setting. When greater, the zone will
change to the Maximum Turn ON and Source Change Volume level set in the ZR-4630's memory.
The factory default level for Maximum Turn ON and Source Change Volume is 45. It can be adjusted up or
down using the steps below.
ALL ON Volume Level
When a System Wide ON command is issued, zones that are turned OFF turn ON to the ALL ON Volume Level
set in the ZR-4630's memory (volume levels in zones that are already turned ON do not change during a
System Wide On command). The factory default level for ALL ON Volume level is 22. It can be adjusted up or
down using the steps below.
Page Volume Level
When a Page occurs, all zones produce the page at the Page Volume Level set in the ZR-4630's memory. The
factory default value for PAGE Volume Level is 35. It can be adjusted up or down using the steps below.
Changing Volume Settings
Step 1. Press and Hold the PROGRAM button for two seconds.
The Program LED lights RED, the Source 2 LED lights RED, Power/On LED Blinks RED, and the Enter IR
lights RED. The LCD display shows "PGM MODE"
Step 2. Press the AM/FM button.
The LCD display shows "MxVol 45"
"MxVol" is the Maximum Turn ON and Source Change Volume Level.
Step 3. Press the Tune + button to increase MxVol or press the Tune - to decrease MxVol.
Step 4. Press the AM/FM button or NEXT button to advance to the next volume-setting feature (shown in the
LCD Display) and repeat steps 3 and 4 for each.
Step 5. Press the PROGRAM button twice to exit programming.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com