2. Switch Plug(s) Off: To power-off a plug, type /OFF n and press
[Enter]. Where "n" is the number or name of the desired plug. Note
that the "/OFF" command can also be entered as "/OF". For example:
/OFF 2 or /OF ROUTER
3. Boot Plug(s): To initiate a Boot cycle, type /BOOT n and press
[Enter]. Where "n" is a the number or name of the desired plug. Note
that the "/BOOT" command can also be entered as "/BO".
/BOOT 1 or /BO ATMSWTCH
4. Suppress Command Conﬁrmation Prompt: To execute a Boot/On/
Off command without displaying the "Sure?" prompt, include the ",Y"
option at the end of the command line. For example:
/ON ROUTER,Y or /BOOT 2,Y
6.2.3. Applying Commands to Several Plugs -
As described below, Boot/On/Off commands can be applied to only one
Switched AC Outlet, or to an assortment of outlets.
Note: When Boot/On/Off operations are initiated, Boot/Sequence
Delay times will be applied as described in Section 126.96.36.199.
1. Several Plugs: To apply an On / Off / Boot command to several
plugs, enter the numbers or names for the plugs, separated by a "plus
sign" (+). For example to switch plugs 1, 3, and 4 Off, enter the
/OFF 1+3+4 [Enter]
2. Series of Plugs: To apply a command to a series of IPS Plugs, enter
the number for the plugs that mark the beginning and end of the series,
separated by a colon. For example, to switch plugs 1 through 3 On,
enter the following:
/ON 1:3 [Enter]
4. All Plugs: To apply a command to all plugs, enter an asterisk in place
of the name or number. For example, to Boot all plugs, enter the
/BO * [Enter]