Loading...
3-4
IPS-4 Internet Power Switch; User’s Guide
b) Switch Outlet Off: From the Web Browser Interface, select the
button in the "Off" column for Plug 1, and then click "Apply."
From the Text Interface, type /OFF 1 and press [Enter]. The
status indicator for Plug 1 should go Off, indicating that the
command has been successfully completed. Leave Plug 1 in the
"Off" state, and then proceed to the next step.
c) Switch Outlet On: From the Web Browser Interface, select the
button in the "On" column for Plug 1, and then click "Apply."
From the Text Interface, type /ON 1 and press [Enter]. The
status indicator for Plug 1 should then go back On, indicating that
the command has been successfully completed.
3. Log Out: When you have finished communicating with the IPS unit
it is important to always log off by issuing the appropriate command,
rather than simply closing your Telnet or communications program.
When you log off using the proper IPS command, this ensures that the
unit has completely exited from command mode, and is not waiting for
the inactivity timeout to elapse before allowing additional connections.
a) Web Browser Interface: Click on the "Log Out" button.
b) Text Interface: Type /X and press [Enter].
This completes the introductory overview of the IPS-4 Internet Power
Switch. Please proceed to Section 4 and Section 5 for complete installation
and configuration procedures.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com