8.4.3. Terminating an Outbound
The CMS-32 offers three different ways to terminate an outbound
Telnet session: the "^]" command, the "/D" command, and the
network port timeout disconnect feature.
1. The Session Disconnect Character: (User Mode and
Supervisor Mode) To terminate an outbound Telnet
connection that was initiated at your network node, type ^]
(press the Control Key plus the right bracket key) and then
2. The /D Command: (Supervisor Mode Only) To terminate
an outbound Telnet connection that was initiated at another
CMS RS232 port, access the CMS command mode using
the Supervisor Level password (either from another CMS
RS232 port, or via the Network Port), and then type:
/D [/Y] <x> [x] [Enter]
/Y (Optional) suppresses the "Sure?" prompt.
xIs the number or name of the desired CMS port(s)
or the "Nn" format Network Port Number (see
Section 8.1) for the Telnet session that you wish
3. Timeout Disconnect: The CMS Network Port's timeout
disconnect feature will also terminate an outbound Telnet
session. Providing the Timeout Disconnect feature is
enabled, outbound Telnet sessions will be automatically
terminated If the CMS-32 determines that no data has been
transferred for the duration of the currently defined timeout
period. The timeout disconnect feature is configured and
enabled via the Network Port Configuration Menu (/N) as
described in Section 5.5.4.
Note: The Timeout Disconnect will be applied to
both outbound Telnet sessions initiated from
Supervisor Mode, and outbound Telnet sessions
initiated from User Mode.