Loading...
12
Getting Started
Camera Setup
5Press I to scroll through the screen,
select Options, and press the k
button.
If you do not wish to use a smart device to
configure the camera, select Later (A14).
6If you are not using NFC, press I to
scroll through the screen, select Next,
and press the k button.
The screen shown on the right is displayed on the
camera.
The status lamps flash red and green alternately
while the camera is waiting to be paired.
If You Are Using NFC
Before selecting Next in step 6, touch the NFC antenna of the smart device to the
Y (N-Mark) on the camera (A2). The SnapBridge 360/170 app on the smart device
launches, and when Camera name acquired. Connect? is displayed on the
screen, select OK. Proceed to step 8.
7Launch the SnapBridge 360/170 app on the smart device.
When the screen shown on the right is displayed on the smart
device, tap the camera name.
For iOS Devices
If the accessory selection screen is displayed after tapping the
camera name, wait until the B Bluetooth icon in the top right
corner of the smart device screen changes from white to gray,
and then tap the camera name. It may take a while before the
camera name is displayed.
set SnapBridge later
from the Network menu,
select Later.
Options
Later
On your smart device,
go to the app store and
search for SnapBridge
360/170. After installing,
open the SnapBridge
Connect to Camera
Camera name
KeyMission 170_xxxxxxxx
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com