Getting Started
Camera Setup
Setup from a Smartphone or Tablet
Here, pairing refers to the setting used to connect the camera and smartphone or
tablet (below, “smart device”) through Bluetooth.
Insert a microSD memory card with sufficient free space into the camera.
Check that the battery is sufficiently charged so that the camera does not turn off
during the procedure.
Smart device
Two apps are available: “SnapBridge” and “SnapBridge 360/170”.
Use “SnapBridge 360/170” when pairing your device with this
Do not pair from the Bluetooth setting screen of the smart
1Check that the camera is off (the screen is off).
To turn off the camera, press and hold the movie button for at least three seconds.
See “Turning the Camera On or Off” (A10) for more information.
2Enable Bluetooth and Wi-Fi on the smart device.
If you are using NFC, enable the NFC setting on the smart device.
3Install the SnapBridge 360/170 app.
After installing the SnapBridge 360/170 app, close all apps that use NFC (including
the SnapBridge 360/170 app). Pairing may fail if apps that use NFC are running.
4Press the movie button or photo button to turn on the camera.
A language selection dialog will be displayed. Press H or I on the back side of the
camera to highlight a language and press k to select.
CVideos on How to Use the SnapBridge 360/170 App
Videos in the website below easily explain how to use the SnapBridge 360/170 app for
pairing and basic operations.
Camera Setup
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com