Loading...
xiii
Introduction
<Important> Notes About Shockproof, Waterproof, and Dustproof
Performance and Condensation
Notes About Shockproof, Waterproof, and Dustproof
Performance
Do not drop the camera, strike it against a hard object such as a rock, or throw it
against a water surface.
Do not subject the camera to shock when using it underwater.
- Do not subject the camera to water pressure by exposing it to rapids or
waterfalls.
- Do not expose to depths greater than 10 m (33 ft) underwater.
- Make sure not to drop the camera underwater. This camera does not float in
water.
Do not continuously use the camera underwater for 60 minutes or more.
Do not insert a wet memory card or battery in the camera.
- Do not open the battery-chamber/memory card slot cover when the camera or
your hands are wet. Doing so may cause water to seep inside the camera or
result in camera malfunction.
Do not open the battery-chamber/memory card slot cover underwater.
If moisture such as water droplets adheres to
the outside of the camera or inside of the
battery-chamber/memory card slot cover,
immediately wipe it off with a soft dry cloth.
- If a foreign substance adheres to the
outside of the camera or inside of the
battery-chamber/memory card slot cover,
immediately remove it with a blower or a
soft cloth.
Do not leave the camera in cold conditions or
in hot conditions of 40°C (104°F) or more for a
long period of time.
- Doing so could cause deterioration of the waterproof performance.
- When using the camera underwater, make sure the water temperature is from
0°C to 40°C (32°F to 104°F).
Do not use the camera at hot springs.
Before Using the Camera Underwater
Check the items below before using the camera underwater.
Make sure that there are no foreign substances inside the battery-chamber/
memory card slot cover.
Make sure that the waterproofing packing of the battery-chamber/memory card
slot cover is not cracked or deformed.
- Make sure that the waterproofing packing is not detached from the camera.
Make sure that the battery-chamber/memory card slot cover is firmly closed.
- Make sure that the battery-chamber/memory card slot cover latch release is in
the LOCK position (A7).
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com