Loading...
83
Using the Menu
The Camera Settings Menu
If You Are Not Using NFC (iOS Devices and Android Devices
Without NFC Support)
1For iOS, remove the Bluetooth device (registered as the camera
name) on the Bluetooth setting screen of the smart device.
2Select Connect to device in the
network menu and press the k button,
and then press H or I to select
Options and press the k button when
the dialog shown on the right is
displayed.
An NFC confirmation dialog is displayed.
3On the camera, press H or I to select
Next and press the k button, and then
launch the SnapBridge 360/170 app on
the smart device when the dialog
shown on the right is displayed.
4Tap e in a Connect,
and then tap the name
of the camera you
want to pair with.
5Follow the instructions on page 13, starting with Step 8.
set SnapBridge later
from the Network menu,
select Later.
Options
Later
App
SnapBridge 360/170
Camera
Camera name_XXXX
Cancel
Connect
Connection options
Select camera...
The smart device will pair with the selected
camera via Bluetooth. If pairing fails, try
again following the instructions in the
manual.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com