Loading...
82
Using the Menu
The Camera Settings Menu
Re-pairing
The camera and the smart device are unpaired when any of the operations below are
performed.
When Restore default settings in Network menu in Camera settings in the c
(setup) menu is performed and the settings are restored to their default values.
When Reset all in Camera settings in the c (setup) menu is performed and the
settings are restored to their default values.
When the Connection options screen is displayed by tapping e in a Connect
in the SnapBridge 360/170, and End pairing is selected.
Follow the procedure below to re-pair with the same smart device again.
If You Are Using NFC
1Select Connect to device in the
network menu and press the k button,
and then press H or I to select
Options and press the k button when
the dialog shown on the right is
displayed.
An NFC confirmation dialog is displayed.
2After checking that NFC is enabled on
the smart device, touch the camera Y
(N-Mark) to the NFC antenna on the
smart device.
Launch the SnapBridge 360/170 app. When the
confirmation dialog for connecting is displayed,
tap OK.
If the SnapBridge 360/170 download site is
displayed, download and install the app before repeating the above steps.
3Follow the instructions on page 13, starting with Step 8.
set SnapBridge later
from the Network menu,
select Later.
Options
Later
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com