Loading...
136
Wireless Transfer Mode
When Access Point (Infrastructure) is selected for Type:
Authentication and Security for Wireless Transfer
The following combinations are available on the COOLPIX P1/P2.
If the security format is changed, security level may lower (from highest security level to low-
est: AES, TKIP, WEP, None).
MAC Address Filtering
When MAC Address filtering is set for a wireless LAN that the camera is connected to, the
camera MAC address is needed. Confirm the camera MAC address (c131).
Port Number
For wireless communication, UDP port number of 5353 and TCP port number of 15740 are
used.
If your computer has a firewall, the firewall settings may need to be changed.
Item Description
Authentication Select Open, Shared or WPA-PSK (select the same setting as the
access point).
Security Select None, WEP 64 bits, WEP 128 bits or TKIP (select the same
setting as the access point).
Security Key
Format
When WEP 64 bits or WEP 128 bits is selected for Security,
select the same setting as the access point (unnecessary when
None is selected for Security).
Security Key Enter the security key set in the access point (unnecessary when
None is selected for Security).
Key Index
When WEP 64 bits or WEP 128 bits is selected for Security,
select the same setting as the access point (unnecessary when
None is selected for Security). Default setting is 1.
Configure Select Auto or Manual for the method of setting the camera IP
address.
IP Address When Manual is selected for Configure, enter the camera IP
address.
Authentication Open Shared WPA-PSK
Security None/WEP WEP TKIP
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com