Whenever TPM is to be initialized, the client must be restarted because the security hardware
must be initialized. Since the security hardware must be initialized, a BIOS screen immediately
displays prompting the user for confirmation.
Upon accepting, the security hardware is initialized. Then the TPM ownership must be taken by
providing a password. We recommend not to change the state or disable it after a TPM is
initialized. Leaving the TPM initialized is not an issue with imaging.
The options available for BitLocker Drive Encryption depend on the policy set. Since the Allow
BitLocker without a compatible TPM is not set or selected, the BitLocker startup preferences
are displayed when TPM is enabled, initialized and owned.
If TPM is not enabled, initialized and owned, then the following dialog box displays when
BitLocker is turned on.
Configuring Bluetooth Connections
You can use your thin client device with other Bluetooth-enabled devices, if it has Bluetooth capability.
To retain your settings, disable the Unified Write Filter (UWF) and configure NetXClean. For more
information, see Before Configuring your thin clients.
To configure your thin client for Bluetooth Connections:
1. Log in as an Admin.
2. Click Start MenuAll appsControl PanelDevice Manager.
The Device Manager window is displayed.
3. Expand Bluetooth Radios and double-click any Bluetooth icon. For example, double-click Generic
Bluetooth Radio to manage the existing Bluetooth device. You can also update the drivers in the
Update tab.
To add another Bluetooth-enabled device to the thin client device, use the Add a Device wizard.
a. To open the Devices and Printers window, click the Devices and Printers icon in Control Panel.
b. Click Add a Device.
The Add a Device wizard is displayed.
4. Refer to the device documentation and follow the instructions to turn on Bluetooth on the
Bluetooth-enabled device. When the device is discovered by the thin client device, select the device.
Click Next and follow the wizard.
Configuring Wireless Local Area Network Settings
To configure the wireless local area network settings, if wireless support is allowed on the thin client
device use Setup a new connection or network window.
To open the Setup a new connection or network window:
1. Log in as an Admin.
2. On the Start menu, click All apps Control Panel Network and Sharing CenterSetup a new
connection or network. You can also select the Open network and sharing session on the taskbar
appeared on the Thin Client Administrator Desktop.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com