- 146 -
>Check that the exposure is correctly compensated. (P60)
>Set Auto Bracket (P61) or [Burst] (P90) of the [Rec] menu to [OFF].
The focus range varies depending on the Recording Mode.
>Set to the proper mode for the distance to the subject.
The subject is beyond the focus range of the camera. (P33)
There is camera shake (jitter) or the subject is moving slightly. (P27)
>The shutter speed becomes slower when pictures are taken in dark places so hold the camera
firmly with both hands to take the pictures. (P27)
>When taking pictures at a slow shutter speed, use the Self-timer. (P59)
Is there any memory remaining on the built-in memory or the card?
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [ ] when the camera is shipped. Therefore, when taking pictures indoors
etc. noise will appear.)
>Decrease the ISO sensitivity. (P79)
>Take pictures in bright places.
Have you set [High Sens.] in Scene Mode, or [Burst] in [Rec] menu to [ ] or [ ]? If so, the
resolution of the recorded picture decreases slightly because of high sensitivity processing, but this
is not a malfunction.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred. The Optical Image Stabiliser is not effective.
Taking pictures using Auto Bracket is not possible.
The recorded picture looks rough. Noise appears on the picture.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com