to turn the unit on.
– “HELLO” appears on the unit’s display.
to select the drive (DVD or VHS).
Insert a disc or VHS cassette.
– Insert a disc or VHS cassette with enough remaining blank space
to select desired channel.
Antenna Mode: Cable TV Mode:
e.g. channel 4-2 e.g. channel 102-45
– To select with the numbered buttons ( 16).
– When no channel setting is performed on the unit and broadcast
is recorded directly from the cable box or satellite receiver,
select a channel on the connected equipment and press
[INPUT SELECT] to select “IN1” or “IN2”.
to select the recording mode.
– Recording mode should be determined by program length and
available time on selected media ( 24)
Recording mode Remaining time
to start recording.
Recording Television Programs
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
[RAM] If the disc is protected, release protection ( 52).
[VHS] Ensure accidental erasure tab is intact.
Press [ PAUSE].
– Press again to restart recording.
Press [ STOP].
Refer to “Important Notes for Recording” ( 23) and “Advanced Recording”
( 24–26) for detailed information on recording.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Digital broadcasts cannot be recorded to video tape.
Icons such as “ [RAM] ” indicate usable
discs. Refer to pages 74 and 75.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
It takes about 30 seconds for the unit
to complete recording management
information after recording ﬁ nishes.
You cannot change the channel or
recording mode during recording.
Simultaneous recording to both DVD
and VHS is not possible.
DMR-EZ48VP.indb 18DMR-EZ48VP.indb 18 2007/12/13 20:42:402007/12/13 20:42:40