Setting the Channels and Clock
to turn the unit on.
“HELLO” appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable ( 11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears ( 14, Step 1)
When this unit is connected to a TV via an HDMI cable, this step is not required.
to select an RF output channel number.
Connection (without HDMI cable or Audio/Video cable): While
viewing the unit’s front display, select “CH3” or “CH4”. If the
selection is appropriate, then the step 3 screen will appear.
Connection (with Audio/Video cable): While viewing the
unit’s front display, select “OFF”.
Seleccione el idioma
Sélection de langue
, to select, then
When the Quick Start Setting screen
appears after this step ( 14, Step 1)
Select TV type and press OK.
(Please refer to Operation Instruction
Aspect Ratio Selection
16:9 Widescreen TV
TV Aspect Ratio:
, to select “4:3 TV” or “16:9
Widescreen TV”, then
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”.
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
Quick Start Setting
Quick Start Function:
, to select “On” or “Off”,
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit’s RF IN.
Automatic Clock and Channel Settings
Automatic Clock and
, to select “Yes” or
When connecting the cable from the wall (cable TV or
antenna) to the unit’s RF IN: Select “Yes”.
The unit then displays the source selection screen ( 13).
When not connecting the cable from the wall (cable TV or
antenna) to the unit’s RF IN: Select “No”.
The unit then displays “Set Clock Manually” screen ( 13,
Manual Clock Setting).
“Quick Start” function ( 58)
If you set Quick Start to on, you
can start recording to DVD-RAM
about 1 second after you press
[ DVD/VHS POWER] to turn the
unit on and then sequentially press
The following happens when you have
– Power consumption in standby mode
increases because power is supplied
to the unit.
To return to the previous screen
Turn on the TV and select the appropriate video input
to suit the connections to the unit. (Example: AV
input, CH3 or CH4)
These are the first settings you make upon buying
the unit. You don’t need to make these settings again.
DMR-EZ48VP.indb 12DMR-EZ48VP.indb 12 2007/12/13 20:42:292007/12/13 20:42:29