Before Initial Use
Charging the Batteries
At the time of shipment, the batteries are not charged. Please charge the batteries
 When the batteries are fully charged, the charge indicator
goes off and " " is displayed. For more information, see
"Battery Information" on page 74.
 It is normal for the handset and charger to feel warm while
the batteries are charging.
 
 Use only the included charger.
Charger Wall Mounting
25 mm
(1 in)
for charger
1. Install the two screws in the wall, spacing them 25 mm (1 in) apart.
Drive the screw
to this point.
25 mm
(1 in)
2. Mount the charger securely on the wall.
 Please copy this page and use as a reference for wall mounting.
Make sure to set the print size to correspond with the size of this page. If the
dimension of the paper output still deviates slightly from the measurement
indicated here, use the measurement indicated here.
 When mounting the charger, ensure that the correct screws are used for the type
of wall.
 Make sure that the wall that the charger will be attached to is strong enough to
support the total weight of the handset and charger (approx. 190 g [0.4 lb]). If not,
it is necessary for the wall to be reinforced.
 When this product is no longer in use, make sure to detach it from the wall.
 When inserting screws, avoid pipes and electrical cables, etc, that may be
 
 Certain types of wall may require plugs to be anchored in the wall before the
screws are inserted.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com