Loading...
24
TQBJίλκ1
The аireless δAσ function can be enabled or disabledέ
1Press ДRAϊIτ, EXTάIσ] repeatedlв to select
“σETWτRK”έ
2Press ДSETUP] repeatedlв to select
“WIREδESS δAσ” and then press ДτK]έ
3Press Д2,1] to select “τσ” or “τόό” and then
press ДτK]έ
The factorв default is “τσ”έ
To check the Wiάόi signal strength аhere this sвstem is
locatedέ
Preparation
ωonnect this sвstem to the аireless netаorkέ (lκ)
1Press ДRAϊIτ, EXTάIσ] repeatedlв to select
“σETWτRK”έ
2Press ДSETUP] repeatedlв to select “SIύσAδ
δEVEδ” and then press ДτK]έ
“δEVEδ ” is indicated on the displaвέ
(“ ” stands for a numberέ)
Press ДτK] to eбit this displaв modeέ
It is recommended to have a signal strength of “γ”έ ωhange
the position or angle of вour аireless router or this sвstem if
the indication is “β” or “1” and see if the connection improvesέ
If “δEVEδ ί” is displaвed, this sвstem cannot establish a link
аith the аireless routerέ (lβθ)
ϊisplaв the name for the connected аireless netаork
(SSIϊ)έ
1Press ДRAϊIτ, EXTάIσ] repeatedlв to select
“σETWτRK”έ
2Press ДSETUP] repeatedlв to select “σET Iσότ”
and then press ДτK]έ
3Press Д2,1] repeatedlв to select “SSIϊ” and then
press ДτK]έ
Press ДτK] to eбitέ
If “στ ωτσσEωT” is displaвed this sвstem is not connected
to a аireless netаorkέ
ωharacters that cannot be displaвed are replaced аith “£”έ
To check this sвstem’s IP address or the Wiάόi εAω
addressέ
1Press ДRAϊIτ, EXTάIσ] repeatedlв to select
“σETWτRK”έ
2Press ДSETUP] repeatedlв to select “σET Iσότ”
and then press ДτK]έ
3Press Д2,1] repeatedlв to select “IP AϊϊRέ” or
“εAω AϊϊRέ” and then press ДτK]έ
The IP address or the εAω address is partiallв
displaвedέ
4Press Д2,1] on the remote control to shoа the
rest of the IP address or the εAω addressέ
Press ДτK] to eбitέ
The “ – ” displaвed on the top or bottom left of the
displaв indicate the first and last units respectivelвέ
To reset the netаork settingsέ
1Press ДRAϊIτ, EXTάIσ] repeatedlв to select
“σETWτRK”έ
2Press ДSETUP] repeatedlв to select “σET RESET”
and then press ДτK]έ
3Press Д2,1] to select “τKς YES” and then press
ДτK]έ
“σETWτRK IσITIAδIГIσύ” is indicated on the displaвέ
When the displaв returns to “σETWτRK”, the netаork
settings are resetέ
This function does not affect the “WIREδESS δAσ” settingέ
Wireless LAN setting
Wi-Fi signal strength
Wireless network name (SSID)
IP/MAC Address
Network reset
8C-HC1020-EGEBG3~T6BJ0981.book 24 ページ 󲔱󲔯󲔰󲔶年󲔲月󲔰󲔵日 木曜日 午後󲔷時󲔳󲔳分
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com