Loading...
23
TQBJίλκ1
Others
As a factorв default, this unit аill turn to standbв mode
automaticallв if there is no sound and it is not being
used for approбimatelв βί minutesέ
To cancel this function
1Press ДSETUP] repeatedlв to select “AUTτ τόό”έ
2Press Д2,1] to select “τόό” and then press ДτK]έ
To turn the function on, select “τσ” in step βέ
This setting cannot be selected аhen radio is the source or
аhen “σET STAσϊBY” is “τσ”έ
If “σET STAσϊBY” is set to “τσ”, this function аill also be
set to “τσ”έ To change the setting, set “σET STAσϊBY” to
“τόό”έ (lright)
When connected to a Bluetooth® device, the function does
not аorkέ
When “Sωάώω1ίβί” is selected from a paired
Bluetooth® device’s Bluetooth® menu, this unit аill turn
on automaticallв from standbв mode and establish a
Bluetooth® connectionέ
1Press ДSETUP] repeatedlв to select “BδUETττTώ
STAσϊBY”έ
2Press Д2,1] to select “τσ” and then press ДτK]έ
To turn the function off, select “τόό” in step βέ
The factorв default is “τόό”έ If this function is set to “τσ”, the
standbв poаer consumption аill increaseέ
When other Panasonic equipment responds to the
supplied remote control, change the remote control
codeέ
1Press ДωϊήUSB] repeatedlв to select “ωϊ”έ
2Press and hold Д] on the unit and Дβ] on the
remote control until the unit’s displaв shoаs
“REετTE β”έ
3Press and hold ДτK] and Дβ] on the remote control
for at least 4 secondsέ
To change the mode back to “REετTE 1”, repeat the steps
above but replace Дβ] аith Д1]έ
This sвstem can turn on automaticallв from standbв
mode аhen this sвstem is selected as the netаork
device’s output speakersέ
As a factorв default, the netаork standbв is off before
вou connect this sвstem to the home netаorkέ
When вou connect it to the home netаork for the first
time, this function аill automaticallв sаitch to onέ
You can also turn the netаork standbв on bв the
folloаing stepsμ
1Press ДSETUP] repeatedlв to select
“σET STAσϊBY” and then press ДτK]έ
2Press Д2,1] to select “τσ” and then press ДτK]έ
When “σET STAσϊBY” is “τσ”
The netаork (аired δAσήWiάόi) аill be active even
in standbв modeέ
The poаer consumption in standbв mode аill
increaseέ To reduce the poаer consumption in
standbв mode, turn off the netаork standbвέ
To turn off the network standbв
Select “τόό” in step βέ
When вou have turned “σET STAσϊBY” to “τόό”
The netаork (аired δAσήWiάόi) аill be disabled in
standbв mode if the sвstem is sаitched to standbв
mode at a source other than “σETWτRK”έ
The netаork (аired δAσήWiάόi) аill be enabled
аhen the sвstem is turned onέ
σetаork standbв аill be active if the sвstem is
sаitched to standbв mode at “σETWτRK”
selector mode and this sвstem is connected to the
netаorkέ
To keep the netаork standbв turned off, select a
source other than “σETWτRK” before sаitching
the unit to standbв modeέ
This function аill return to default setting if вou have
performed the operation for netаork resetέ (lβ4)
When the sвstem is turned on bв this feature, the beginning
part of the music maв not be plaвed backέ
ϊepending on the app, the conditions for activating this
function maв differέ
The sвstem maв not turn on even аhen selected as the
output speakersέ In that case, start plaвbackέ
Auto off function
Bluetooth® standbв
Changing the unit and remote
control code
Network standbв
8C-HC1020-EGEBG3~T6BJ0981.book 23 ページ 󲔱󲔯󲔰󲔶年󲔲月󲔰󲔵日 木曜日 午後󲔷時󲔳󲔳分
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com