Loading...
10
TQBJίλκ1
1Turn this sвstem onέ
2Press ДRAϊIτ, EXTάIσ] on the remote control
repeatedlв to select “σETWτRK”έ
3To enter “WPS PUSώ” mode
1 Press ДSETUP] on the remote control repeatedlв to
select “σET SETUP” and then press ДτK]έ
“WPS PUSώ” is indicated on the displaвέ
β Press ДτK]έ
γPress Д2,1] on the remote control to select “τKς
YES” and then press ДτK]έ
Alternativelв, аhile pressing and holding doаn Д<] on
the unit, press and hold doаn Д5ή9] on the unit for
at least 4 secondsέ
If the unit is alreadв connected to a аireless δAσ netаork,
“σETWτRK IσITIAδIГIσύ” is displaвed for about 1 minuteέ
“WPS” flashes on the displaвέ
4Activate the WPS button on the аireless routerέ
τn the unit’s displaв, “SUωωESS” appears аhen the
connection is establishedέ (The netаork indicator (l4)
lights upέ)
“όAIδ” maв be displaвed if the connection аas not
made аithin the set time limitέ Press ДτK]έ Trв the
setting againέ If “όAIδ” is still displaвed, trв other
methodsέ
Using the WPS PIN code
1Turn this sвstem onέ
2Press ДRAϊIτ, EXTάIσ] on the remote control
repeatedlв to select “σETWτRK”έ
3To enter “WPS PIσ” mode
1 Press ДSETUP] on the remote control repeatedlв to
select “σET SETUP” and then press ДτK]έ
βPress Д2,1] on the remote control to select “WPS
PIσ” and then press ДτK]έ
Alternativelв, аhile pressing and holding doаn Д<] on
the unit, press and hold Д:ή6] on the unit for at
least 4 secondsέ
If the unit is alreadв connected to a аireless δAσ netаork,
“σETWτRK IσITIAδIГIσύ” is displaвed for about 1 minuteέ
The PIσ code is indicated on the displaвέ
4Enter the PIσ code into the аireless routerέ
τnce the sвstem enters WPS PIσ code mode, вou cannot
set up using the WPS buttonέ To use the WPS button, turn
the sвstem off and then on, and redo the netаork settingsέ
ϊepending on a router, other connected devices maв
temporarilв lose their connectionέ
όor details, refer to the operating instructions of the аireless routerέ
1ϊisconnect the Aω mains leadέ
2ωonnect the unit to a broadband router, etcέ using
a δAσ cableέ
3ωonnect the Aω mains lead to the unit and turn
this sвstem onέ
When the connection is established, the netаork
indicator (l4) lights upέ
Use categorв η or above straight δAσ cables (STP) аhen
connecting to peripheral devicesέ
The δAσ cable must be connected or disconnected аhile the
Aω mains lead is disconnectedέ
Inserting anв cable other than a δAσ cable in the δAσ port
can damage the sвstemέ
If the δAσ cable is disconnected, the netаorkάrelated
settings (l11) аill be initialiгedέ In that case, make the
settings againέ
When a δAσ cable is connected, the Wiάόi function аill be
disabledέ
Method 3μ
Using WPS (Wi-Fi Protected SetupTM)
A compatible аireless router maв have the WPS
identifier markέ
eέgέ,
Wired LAN connection
Method 4μ
Using a LAN cable
δAσ cable
(not supplied)
Broadband router, etcέ
eέgέ,
8C-HC1020-EGEBG3~T6BJ0981.book 10 ページ 󲔱󲔯󲔰󲔶年󲔲月󲔰󲔵日 木曜日 午後󲔷時󲔳󲔳分
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com