Loading...
9
Configuring to Replicate a Configured USB Key
After completing the steps in "Using the USB Firmware Tool" to open the configuration
dialog box, complete the following to configure the USB key to update firmware to a
supported thin client:
Figure 8 Select source USB key
1. Select the source USB key (containing the configurations you want to copy to other
USB keys) that you want to replicate (you can use Refresh as needed to recognize an
inserted USB key), and then click Next.
Note
The progress bar shows the task and status of the copy action being
performed during the process.
2. After the copy process is complete, the select target USB key dialog box opens.
Figure 9 Select target USB key
3. Select the target USB key (to which you want the source USB key configurations
copied) that you want (you can use Refresh as needed to recognize an inserted USB
key), and then click Next.
Note
The progress bar shows the task and status of the copy action being
performed during the process.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com