Figure 4 Prepare USB drive for copy
5. Select the USB key onto which you want the configurations (you can use Refresh as
needed to recognize an inserted USB key), and then click Next.
The progress bar shows the task and status of the action being performed
during the process.
6. After configuration, click Finish to close the wizard and then remove the USB key for
use (after inserting the USB key into a supported Wyse thin client and booting the thin
client, you will be prompted to continue with the copy process or to cancel the process
and reboot the thin client).
To support the bootable USB key, you must be sure to configure the BIOS
option for booting the thin client from the USB key before trying to use the
key. For information on BIOS configuration, refer to "Configuring the BIOS to
Boot from a USB Key."
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com