Loading...
- 41 -
Reference
F99
hThe unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
NET
hWhile connecting to a network.
NO PLAY
hThere is a viewing restriction on a BD-Video
or DVD-Video. (>34)
hA DVD-Video disc with an incompatible color
encoding system or region code is inserted.
NO READ
hThe media is dirty or badly scratched. The
unit cannot play.
REMOVE
hThe USB device is drawing too much power.
Remove the USB device.
SET CODE
(“” stands for a number.)
hThe remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold
[OK] and the
indicated number
button at the same time for more than
5seconds.
U59
hTem p e r a t u r e o f this unit is hot and the un it
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
START
hA firmware update will start. Please do not
turn off the unit.
UPDATE /5
(“” stands for a number.)
hA firmware update is in progress.
Please do not turn off the unit.
FINISH
hThe firmware update is complete.
Messages on the unit’s
display
Value Electronics
Factory Direct Authorized Dealer
www.ValueElectronics.com
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com