Loading...
- 39 -
Reference
Cannot hear the desired audio.
hCheck the connections and the “Digital Audio
Output” settings. (>11, 31)
hWhen the unit is connected to an amplifier/
receiver with the 2ch AUDIO OUT/7.1ch
AUDIO OUT terminals, set “Analog Audio
Output”. (>31)
hTo output a ud i o fr o m a d e v i c e c o n n e c t e d with
an HDMI cable, set “Audio Output” to “On” in
the Setup menu. (>30)
hWhen connecting this unit to a TV via an
HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
“HDMI(VIDEO) Output Mode” to “Auto ( Video
Only / Video+Audio )”. (>11, 29)
Even when gapless playback is performed for
an album or similar group of songs containing
a sound source recorded at a live
performance or concert (a music file
containing songs that are recorded
continuously), the playback is interrupted
between songs.
hIn the following cases, playback is interrupted
between songs:
–When the file contains recordings that differ
from one another in their settings, such as
file format, sampling frequency, and
channel number
–When you set “Repeat Play” to “One track”
or “Shuffle” to “On” during gapless playback
–When files of 100 or more songs are
contained in a single folder
There is no sound coming out.
hTo output aud io using OPT I CAL te rminal, set
“OPTICAL Down Sampling” properly. (>31)
hRefer to “Connecting to an amplifier/receiver”
(>11 - 15) to check the audio output settings
suited to the connections of your device.
In the following cases, audio is not output
from the terminals listed below:
HDMI VIDEO OUT terminal
–When a device is connected to the HDMI
AUDIO OUT terminal and “HDMI(VIDEO)
Output Mode” is set to “Auto ( Video Only /
Video+Audio )” (>29)
–When “Audio Output” in “Advanced
Settings” is set to “Off” (>30)
–While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL Only” (>31)
–When “Analog Audio Output” is set to
“7.1ch” or “2ch (Downmix)” (>31)
HDMI AUDIO OUT terminal
–When “Audio Output” in “Advanced
Settings” is set to “Off” (>30)
–While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL Only” (>31)
–When “Analog Audio Output” is set to
“7.1ch” or “2ch (Downmix)” (>31)
OPTICAL terminal
–When a device is connected to the HDMI
AUDIO OUT terminal and “Audio Output” in
“Advanced Settings” is set to “On” (>30)
–While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “HDMI Only” or “Analog Only”
(>31)
Analog AUDIO OUT terminals
–While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL Only” (>31)
–When “Analog Audio Output” is set to “Off”
(>31)
Audio
Value Electronics
Factory Direct Authorized Dealer
www.ValueElectronics.com
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com