Loading...
- 37 -
Reference
You have forgotten your ratings password.
You want to cancel the ratings level.
hThe ratings level returns to the factory
defaults.
1While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the
screen.
3Press [OK].
The TV screen turns black.
hIn the following cases, HDMI authentication
takes place and a black screen is displayed:
When “24p Output” is set to “Automatic”.
When the display is switched between 2D
and 3D images.
When you quit the 4K playback by
displaying another screen, including the
HOME menu.
[UB420] When “HDMI Output Settings of
Music Playback” is set to “Sound Quality
Priority”.
This unit does not recognize the USB
connection correctly.
hDisconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
hUSB devices may not be recognized by this
unit when connected using the following :
a USB hub
a USB extension cable
hIf you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
hIf the USB HDD is not recognized, the power
to the USB HDD may not be supplied. Supply
power from an external source.
h[UB420] If you connect a second USB device
while a screen other than the Home screen is
displayed, it will not be detected. Display the
Home screen and reconnect the USB device
you want to use.
Images from this unit do not appear on the TV
screen, or they are distorted.
hAn incorrect resolution is selected in “Video
Format”. Reset the setting as follows:
hThe connected devices are changed. Reset
the setting as follows:
1While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash.
2Press [8] and the blue button on the remote
control at the same time for more than
5 seconds.
Set the item again. (>29)
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD® audio are not output properly,
select “Yes” in “Default Settings” (>35) and
make proper settings.
“4K(50p/60p) Output” will be set to “Off”.
Make the correct setting again. (>29)
hPAL discs cannot be correctly viewed on an
NTSC TV.
hWhen “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this unit,
select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (>32)
hWhen outputting in 4K, images may be
distorted depending on the HDMI cable. Use
an HDMI cable that supports 18 Gbps.
[UB420]
Video is not output.
hVideo is not output when the “High Clarity
Sound” is set to “On (Video Off)”. (>28)
hVideo from the HDMI AUDIO OUT terminal is
not output when the “HDMI(AUDIO) Output
Mode” is set to “Audio Only”. (>29)
Picture
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com