Loading...
Option Description
NOTE: This feature is only functional when the AC power
adapter is connected. If the AC power adapter is removed
during standby, the system setup removes power from all
the USB ports to conserve battery power.
The Enable USB Wake Support option is enabled by default.
Wake on LAN This option enables or disables the feature that powers on the
computer from the O state when triggered by a LAN signal. The
options include:
• Disabled
LAN Only—This option is enabled by default.
LAN with PXE Boot
Wake on 2nd NIC (RJ-45/SFP) This option enables the computer to power up from the OFF state
when triggered by special LAN signals. The options include:
Disabled—This option is enabled by default.
LAN Only
LAN with PXE Boot
Block Sleep The Block Sleep option blocks you from entering to sleep mode in
the operating system environment.
Block Sleep—This option is disabled by default.
POST behavior screen options
Table 20. POST behavior options
Option Description
Adapter Warnings This option enables or disables the system setup (BIOS) warning
messages when you use certain power adapters.
By default, the Enable Adapter Warnings option is enabled.
Keypad Error This option enables you to specify whether keyboard related errors
are reported when the system boots. By default, the Enable
Keyboard Error Detection option is enabled
Numlock LED This option enables and disables the Numlock LED when the
system boots.
By default, this option is enabled.
Fastboot This option enables you to speed up the boot process by bypassing
some of the compatibility steps. The options include:
• Minimal
Thorough—This option is enabled by default.
• Auto
Extended BIOS POST Time This option enables you to create an extra preboot delay. The
options include:
0 seconds—This option is enabled by default.
BIOS overview 43
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com