Text for non-USB connected printers on connection to Windows hosts. The driver name mapping takes place either through a
printer-mapping le read by the system as part of the global prole (wnos.ini) or by MetaFrame servers through the MetaFrame
printer conguration le (\winnt\system32\wtsprnt.inf).
dLPD Hosts—The DNS or WINS name of the server for the network printer. An IP address of the printer on the network can also
be entered.
If the printer is attached to another thin client on your network, the entry in the LPD Hosts box is the name or address of that
thin client.
eLPD Queue Name — An LPD host maintains a named queue for each supported printer. Enter the name of the queue
associated with the printer to be used.
This name can be dierent for each vendor. This is a required eld, and you must ensure to add the correct queue name, as the
network printer uses this name for mapping the incoming print jobs. For example, auto can be used for HP LaserJet 4200n PCL6
as per documentation found on the HP Web site.
NOTE: If the printer is attached to another thin client on your network, the LPD Queue Name must match the content
of the Printer Name box displayed on the thin client.
fPrinter Class — (Optional) Select the printer class from the list.
gEnable the printer device — Select this option to enable the printer on a remote device.
3 Click OK to save the settings.
Conguring the dual head display settings in Dell Wyse ThinOS
To congure the dual head display settings in Wyse ThinOS:
1 From the desktop menu, click System Setup, and then click Display.
2 In the Display dialog box, click Dual Head and do the following. Click the Dual Head tab, and use the following guidelines:
This feature is applicable for supported dual-monitor-capable thin clients only.
aDual Head—Select Mirror Mode to have the two monitors work, or Span Mode to have the two monitors work individually.
bMain Screen—Select either Screen 1 or Screen 2 as the main screen from (Screen1 or Screen2). The other screen is extended
from the main screen.
cLayout—Select how you want the two monitors to be oriented to each other.
Horizontal — You can navigate between the monitors from the left and right of the screens.
Vertical— You can navigate between the monitors from the top and bottom of the screens.
dAlignment— Select how you want the monitors to be aligned Bottom, Center, or Top.
Screens are bottom-aligned in a horizontal orientation; center-aligned; top-aligned in a horizontal orientation.
eTaskbar (Classic Desktop Only)—Select under which screen you want the taskbar to appear Whole Screen or Main Screen.
Gamma Supported Monitors Only— Use the Gamma Setup tab to adjust the saturation values for Red, Green and Blue on
VGA connected monitors supporting gamma settings, if you feel the default settings are too light. Be aware that the Gamma
Setup tab will be disabled once you click Save+Exit. You can enable it again by setting rgamma={1-100} ggamma={1-100}
bgamma={1-100} in the Resolution INI parameter. For more information, about enabling the Gamma Setup tab, see Dell Wyse
ThinOS INI Guide.
For Swap dual screens, when you set Main Screen to Screen2, an additional check box is displayed at the bottom of the tab that
allows you to swap dual screens. If you clear the check box, the Screen1 is usually the left one or the top one in dual display.
When you set Main Screen to Screen2, the main screen is changed to the right screen or bottom screen. If you select the Swap
dual screens check box, you are able to set Main Screen to Screen2, but still have it at the left side or the top side.
Wyse 5070 thin client conguration on ThinOS 23
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com