Loading...
NOTE: To exit the Management Conguration screen, and load the ThinOS system desktop, click
Exit.
7 Click Done to exit the First Boot Wizard or click Next to enter the Connection Broker Conguration setup.
8 On the Connection Broker Conguration screen, congure the following:
Citrix—The broker allows you to connect to full desktops using XenDesktop or individual applications using XenApp from a
centralized host through Citrix Receiver Client.
Server Address—Enter the host name or IP address of the broker connection.
Enable theme: ThinOS Lite—Select this check box to boot the thin client in ThinOS Lite mode.
StoreFront style—Select this check box to enable the Citrix StoreFront based layout of published applications and desktops
on the thin client.
Microsoft—The broker allows you to connect to the virtual desktops using RemoteApp and Desktop connection. Enter the host
name or IP address of the broker connection.
VMware—The broker allows you to connect to the remote desktops using VMware Horizon Client.
Server Address—Enter the host name or IP address of the broker connection.
Enable theme: VMware View—Select this check box to set the ThinOS desktop theme to VMware View mode.
DELL—The broker allows you to connect to the virtual desktops or applications using Dell vWorkspace. Enter the host name or IP
address of the broker connection.
Amazon WorkSpaces—The broker allows your PCoIP clients to connect to virtual desktops that run on AWS. Enter the host
name/IP address/FQDN of the broker connection.
NOTE: Amazon WorkSpaces option is applicable only to the PCoIP clients.
Other—The broker allows you to connect to the virtual desktops or applications using other supported protocols. Enter the host
name or IP address of the broker connection.
Certicates Manager—Click Certicates Manager to import or request a certicate.
Disable SSL warning—Select this check box to disable the warnings for your SSL (Secure Sockets Layer) connection.
9 Click Done.
NOTE: To congure the Management Conguration setup again, click Back, and follow steps 6 and
7.
The device exists from the First Boot Wizard mode, and the ThinOS desktop is displayed.
Logging on to the Wyse 5070 thin client running Wyse
ThinOS
What you see after logging on to the server depends on the administrator congurations.
Users with a Classic Desktop - will see the classic ThinOS desktop with full taskbar, desktop, and Connect Manager familiar to ThinOS
users. This module oers the default out-of-the-box experience and is recommended for terminal server environments with published
applications and for backward compatibility with ThinOS 6.x versions.
Users with a Zero Desktop - will see the Zero Desktop with the Zero Toolbar showing the assigned list of connections from which to
select. This option is recommended for VDI and any full-screen– only connections.
In any desktop, you can select the desktop option you want (Classic Desktop or Zero Desktop) and create the connections you need by
using the Visual Experience tab on the Remote Connections dialog box.
To open the Remote Connections dialog box, perform one of the following tasks:
Classic Desktop — Click User Name , and then select System Setup > Remote Connections.
Zero Desktop — Click the System Settings icon on the Zero Toolbar, and then select Remote Connections.
NOTE: User Name is the user who is logged-on and is located at the lower-left pane of the taskbar
20 Wyse 5070 thin client conguration on ThinOS
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com