b. Printer Name —(Required) Enter the name to be displayed in your list of printers.
c. Printer Identification- Enter the type or model of the printer in the exact text of the Windows
printer driver name—including capitalizations and spaces.
This name must be either the device driver name for the printer under the Microsoft Windows
system, or a key to map to the device driver. If not specified, the name will be defaulted to the
printer-supplied identification for standard direct-connected USB printers or Generic / Text for
non-USB connected printers upon connection to Windows hosts. The driver name mapping takes
place either through a printer-mapping file read by the system as part of the global profile
(wnos.ini) or by MetaFrame servers through the MetaFrame printer configuration file (\winnt
d. \\Host\Printer—Enter the Host\Printer or use the browse folder icon next to the box to browse
your Microsoft Networks and make the printer selection you want from the network printers
available (the DNS name or IP address of the Windows print server on the network).
e. Printer Class —(Optional) Select the printer class from the list.
f. Enable the printer device—Must be selected to enable the printer. It enables the device so it
displays on the remote host.
g. Enable LPD service for the printer—Select this to make the thin client an LPD (Line Printer
Daemon) network print server for LPR printing requests from the network, see Using Your Thin
Client as a Print Server (LPD).
If the thin client is to be used as an LPD printer server, DHCP must not be used and a static IP
address must be assigned to the thin client as described in Configuring the Network Settings.
3. Click OK to save the settings.
Using the Printer Setup Options
To configure the Printer setup options:
1. From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
2. Click the Options tab, and use the following guidelines:
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com