Loading...
d. LPD Hosts—The DNS or WINS name of the server for the network printer. An IP address of the
printer on the network can also be entered.
If the printer is attached to another thin client on your network, the entry in the LPD Hosts box is
the name or address of that thin client.
e. LPD Queue Name — An LPD host maintains a named queue for each supported printer. Enter the
name of the queue associated with the printer to be used.
This name can be different for each vendor. This field is required and must be correct so that the
network printer accepts incoming print jobs properly. For example, auto can be used for HP
LaserJet 4200n PCL6 as per documentation found on the HP Web site.
NOTE:
If the printer is attached to another thin client on your network, the LPD Queue Name must
match the content of the Printer Name box on the thin client with the printer attached.
f. Printer Class — (Optional) Select the printer class from the list.
g. Enable the printer device — Must be selected to enable the printer. It enables the device so it
displays on the remote host.
3. Click OK to save the settings.
Configuring the SMBs settings
To configure the SMBs settings:
1. From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
2. Click SMBs tab, and use the following guidelines when printing to a Windows network printer.
NOTE:
The printer name shared by Windows must not contain any spaces or ThinOS will not be able
to use it.
a. Select SMB —Select the SMB you want from the list.
85
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com