You can optimize performance and modify the frame rate per second, if the Optimize for CPU
check box is selected—supported values include 1/1, 1/2, 1/3, 1/4, 1/5, and 1/6– directly from the
thin client (if the webcam supports Universal Video Driver).
This feature is experimental and does not currently support central configuration (INI parameters).
Also, this feature is CPU intensive and is recommended for high performance products such as the
Wyse 5010 thin client with ThinOS (D10D).
Configuring the Touch Screen Settings
Use the Touch Screen tab to configure touch screens that are connected to the thin client (USB). The tab
is available (not grayed out) when the thin client detects that a touch screen is attached through a USB
port and the setup or calibration has not been performed. The Touch Setup window prompts you to
touch two circles on the screen to make the necessary calibration adjustment. The adjusted calibrated
values are saved in the local terminal NVRAM until the system is reset to factory default, or another type
of touch monitor is connected.
Configuring the Bluetooth Settings
To configure the Bluetooth settings:
1. From the desktop menu, click System Setup, and then click Peripherals.
The Peripherals dialog box is displayed.
2. Click the Bluetooth tab, and use the following guidelines: