This feature is applicable for supported Dual Monitor Capable Thin Clients Only.
a. Dual Head—Select Mirror Mode to have the two monitors work in a matching state, or Span
Mode to have the two monitors work separately second is extended from first.
b. Main Screen—Select which of the two monitors you want to be the main screen (Screen1 or
Screen2). The other screen is extended from the main screen.
The other screen is extended from the main screen. When using a DVI to DVI/VGA splitter with
VGA and DVI monitors at the same time, the VGA monitor will be the primary monitor.
c. Layout—Select how you want the two monitors to be oriented to each other.
Horizontal — where you move between the monitors from the left and right of the screens.
Vertical— where you move between the monitors from the top and bottom of the screens.
d. Alignment— Select how you want the monitors to be aligned Bottom, Center, or Top.
Bottom means screens are bottom-aligned in a horizontal orientation; Center means screens are
center-aligned; Top means screens are top-aligned in a horizontal orientation.
e. Taskbar (Classic Desktop Only)—Select under which screen you want the Taskbar to appear
Whole Screen or Main Screen
Gamma Supported Monitors Only— Use the Gamma Setup tab to adjust the saturation values for
Red, Green and Blue on VGA connected monitors supporting gamma settings, if you feel the