Loading...
If you select the Connect to these servers check box, the box is enabled where you can
enter the IP address of server.
Click Browse to find and select the Client Certificate file and Private Key file you want.
The following kinds of server names are supported — all examples are based on Cert Common
name company.wyse.com
NOTE:
Using only the FQDN, that is company.wyse.com does not work. You must use one of the
options (note that *.wyse.com is the most common option as multiple authentication
servers may exist): servername.wyse.com
*.wyse.com
*wyse.com
*.com
f. LEAP — If you select the LEAP option, click Properties to open and configure the Authentication
Properties dialog box. Be sure to use the correct Username and Password for authentication. The
maximum length for the username or the password is 64 characters.
g. PEAP — If you select the PEAP option, click Properties to open and configure the Authentication
Properties dialog box. Be sure to select either EAP_GTC or EAP_MSCHAPv2, and then use the
correct Username, Password and Domain. Validate Server Certificate is optional.
NOTE:
The server certificate text box for LEAP and PEAP supports a maximum of approximately 127
characters, and supports multiple server names.
h. To configure EAP-GTC, enter the username only. The password or PIN is required when
authenticating.
To configure EAP-MSCHAPv2, enter the username, password and domain.
Important: The domain/username in the username box is supported, but you must leave the
domain box blank.
The CA certificate must be installed on the thin client and the server certificate is forced to be
validated. When EAP-MSCCHAPV2 is selected in EAP type in the Authentication Properties dialog
box (for PEEP IEEE802.1x authentication), an option to hide the domain is available for selection.
Username and Password boxes are available for use, but the Domain text box is disabled.
3. Click OK to save the settings.
Configuring the WLAN Settings
1. From the desktop menu, click System Setup, and then click Network Setup.
The Network Setup dialog box is displayed.
2. Click the WLAN tab, and use the following guidelines:
36
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com