Loading...
RRinger Volume
RRing On Charger
RAuto Answer
RKey Tone
RVibrate (Vib.&Ring)
To set or cancel
To set or cancel Silent Mode, press and hold for more than 2 seconds.
Note
RIf you set the handset on the charger during Silent Mode, the handset will not vibrate.*1
RWhen Silent Mode is set, the low battery alarm will not be heard in standby mode.
RWhen Silent Mode is set, confirmation sounds for setting the ring pattern or ring volume will not play.
*1 Please note that if you set the handset on the charger while receiving an incoming call, vibration will
stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is
lifted up again. (If "Quick Answer" is set, lifting up the handset will answer the call.)
Residential Mode and Office Mode
You can choose one of the following modes depending on how you intend to use the handset:
Residential Mode
This mode is designed for residential use.
Office Mode
This mode is designed for business use.
Note
RThe soft keys and procedures vary depending on the mode.
RPlease note that the soft keys and procedures in this manual are based on Residential mode.
RFor details about soft keys differences, see “Soft Keys” on Page 25.
RFor details about procedure differences, see “Operation Outline for Residential Mode” on Page 27
and “Operation Outline for Office Mode” on Page 28.
Advanced Voice Clarity
When Advanced Voice Clarity is enabled, environmental noise is reduced to improve and maintain sound
quality for the other party in the conversation. Receiver volume is also increased according to the level of
environmental noise.
It is useful in noisy environments such as warehouses, manufacturing plants, restaurants, and garages.
Advanced Voice Clarity can be enabled by default for regular use, or toggled on/off during a call.
Enabling or disabling Advanced Voice Clarity
1. Press or the [CENTER] navigation key.
2. Select "Setting Handset" by pressing the arrow keys, and then press .
3. Select "Talk Option" by pressing the arrow keys, and then press .
4. Press [ ] or [ ] to select "Voice Clarity", and then press .
5. Press [ ] or [ ] to select "On" or "Off", and then press .
Temporarily enabling or disabling Advanced Voice Clarity during a call
You can enable or disable Advanced Voice Clarity during a call by doing either of the following:
21
Before Operating the Telephone
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com