Loading...
Introducing the NetXClean Utility
NetXClean is a clean-up utility that keeps extraneous information from being stored on the local disk. If
you want to keep certain profile configurations such as printers and other peripherals, be sure to
configure NetXClean to refrain from cleaning up any number of the explicitly declared profiles you want.
For more information about NetXClean, see Understanding the NetXClean Utility.
For detailed guidelines on using NetXClean, go to www.dell.com/wyse/knowledgebase, and browse
10621 to see the Knowledge Base Solution.
Connecting to a Printer
To connect a local printer to your thin client, be sure you obtain and use the correct adapter cables. You
also need to install the driver for the printer by following the printer driver installation instructions. For
information on connecting to printers, see Connecting to a Printer or an External Device.
Connecting to a Monitor
Depending on your thin client model, with proper monitor cables, splitters or adapters you can connect
to a monitor using the following:
A VGA (analog) monitor port
Display (digital) port
For E7270 platform HDMI & Mini DP Port
For 3460 platform HDMI and VGA port
For more information on configuring dual display settings, see Dual Monitor Display.
NOTE: When you use a DVI to DVI/VGA splitter for dual-monitor supported thin clients, the VGA
monitor will be the primary monitor; when you use a DisplayPort, the DisplayPort monitor will be
the primary monitor.
Logging Off
To log off the thin client:
1. On the taskbar, click the Start button.
2. From the Start menu, point to the arrow next to the log off button, and then click any one of the
following:
Restart— To restart your thin client.
Sleep— This mode enables the power-saving state and allows the thin client to quickly resume
full power operations when you want to start working again.
Shut down– Preferred for orderly closing of the operating system.
3. You can also log off the thin client by either of the ways: using the Windows Security window.
From the Start menu, click log off if you want to log off your thin client.
Press CTRL+ALT+DEL to open the Windows Security window, and then click log off.
10
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com