34 RT-N10E Chapter 6: Troubleshooting
Problem Action
Cannot access the Internet
via wireless LAN adapter.
Move the router closer to the wireless client.
Check whether the wireless adapter is
connected to the correct wireless router.
Check whether the wireless channel in use
conforms to the channels available in your
Check the encryption settings.
Check if the ADSL or Cable connection is
Retry using another Ethernet cable.
Internet is not accessible. Check the status indicators on the ADSL
modem and the wireless router.
Check if the WAN LED on the wireless
router is ON. If the LED is not ON, change
the cable and try again.
When ADSL Modem “Link”
light is ON (not blinking), this
means Internet Access is
Restart your computer.
Refer to the Quick Start Guide of the
Check if the WAN LED on the wireless
router is ON.
Check the wireless encryption settings.
Check if the computer can get the IP
address (via both wired network and
wireless network).
 
to use a proxy server.
If the ADSL “LINK” light blinks
continuously or stays off,
Internet access is not possible
- the Router is unable to
establish a connection with
the ADSL network.
Ensure that all your cables are all properly
connected .
Disconnect the power cord from the ADSL
or cable modem, wait a few minutes, then
reconnect the cord.
If the ADSL light continues to blink or stays
OFF, contact your ADSL service provider.
Network name or encryption
keys are forgotten.
Try setting up the wired connection and
Press the Restore button at the rear panel
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com