ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 09/02/2017 | K06315
Dynamometric press system DYN
1. Fig. 3
2. Adjust the mobile fork as described in section 8.2.
3. Replace and tighten the screw caps (Fig. 3).
8.4. Grind point adjustment
To adjust the grind point, simply turn the grind adjustment knob. A clockwise
a more coarse grind.
CAUTION: Changing grind settings must be done when the grinder is on and burrs are in
motion. Not doing this suposes that the burrs will gunk up and cleaning will be required.