Audio Output and Volume Adjustment
In camera mode, if Camera 1 is not triggered, the front audio output will be the
from the last audio source played. Rotate the VOL control (1) to adjust the volume
of the audio source. When Camera 1 is triggered and the Auto Mic Enable feature
is on, the camera 1 video appears on the entire screen and the audio input from
the camera is played. In this case, rotate the VOL control (1) to adjust the volume
when Camera 1 is triggered.
NOTE: The upper area of the screen is the current playback information
bar area. Press the top of the screen to remove the bar or make the bar
reappear.
Camera Control Options
Touch the lower part of the screen to make the camera controls appear.
. Touch the “CAM 1” Button to view the Camera 1 video in full screen.
. Touch the “CAM 2” Button to view the Camera 2 video in full screen.
. Touch the “CAM 3” Button to view the Camera 3 video in full screen.
. Touch the “AUDIO” Button to turn the Camera audio ON/OFF.
. Touch the Button on the screen to change Brightness, Contrast, Saturation
and Hue settings. Use the +/- buttons to
adjust each setting from 0-10.
JRV9000
adjust each setting from 0 -20.
66
2006-2020 Rsmanuals.com