Loading...
ARTURIA ARP2600 USER’S MANUAL 33
Create a new configuration
A new configuration can be created by clicking on the “Learn menu”, “New Config” entry.
This will open a popup: enter the name you want to call your configuration and click on
the “SAVE” button. A new entry for your configuration now exists in the list of available
configurations.
You may now fill in this initially empty configuration by performing the assignment opera-
tions described in the previous section.
Copy a configuration
It is possible to copy a configuration by loading it and then clicking on “Save Config As”.
A popup opens: enter the name of your configuration. A new entry for your configuration
now exists in the list of available configurations.
Remove a configuration
It is possible to remove a configuration by first loading it and then clicking on “Delete
Current Config”.
4.3.6.4 Minimum and Maximum Ranges
For each assignment, a minimum range value and a maximum range value can be set.
This allows you to limit how much the controller will affect the parameter on ARP2600 V.
The assigned parameter will have the configured minimum value when the
controller will be at its lowest position
The assigned parameter will only reach the configured maximum value when the
controller will be at its highest position
You can invert (Negative Slope) the Min and Max so that parameter will have
minimum value when control has the highest value, and parameter will have
maximum value when control has the lowest value
parameter_value = MIN + (MAX MIN) * control_value
Input
control
values
MAX
MIN
POSITIVE SLOPE
Output para-
meter values
Input
control
values
MAX
MIN
NEGATIVE SLOPE
Output para-
meter values
MAX
MIN
DEFAULT
Output para-
meter values
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com