Loading...
40
IntraServer support for SCSI Logical Units (DKW101, DKW102...) is
Optional, because some older SCSI devices do not support LUNs.
* Do you want to support SCSI Logical Units? [NO]? y
IntraServer VAX SCSI adapters default to a port letter of "W"
and therefore devices will be named as follows:
Device Name | SCSI ID | LUN
--------------+-----------+------
DKW100 | 1 | 0
DKW101 | 1 | 1
DKW102 | 1 | 2
DKWnnn | |
. | |
. | |
DKW200 | 2 | 0
DKW300 | 3 | 0
DKWnnn | |
. | |
. | |
if this naming convention conflicts with other devices on your
system, you may change the port letter to "X", "Y" or "Z", changing
your device names to DKXnnn, DKYnnn or DKZnnn respectively.
* Change port letter from W [N]? y
Enter port letter (W,X,Y or Z) [W] : y
Your IntraServer UltraSCSI adapter is capable of Fast Ethernet
support, if ordered with the Fast Ethernet option.
This procedure can install the Fast Ethernet at this time.
* Do you want to add Fast Ethernet support at this time? [YES]?
The IntraServer Ethernet port on this machine supports
Fast (100Mb/sec) or Standard (10Mb/sec) operation.
Answering YES (default) to the question below will
select 100Mb/sec operation.
Answering NO to the question below will select 10Mb/sec operation.
* Do you want to run FAST (100Mb/sec) ethernet? [YES]?
The IntraServer Ethernet port on this machine supports
Cluster traffic over the Fast Ethernet port.
Answering YES (default) to the question below will
allow cluster traffic to use the fast ethernet port.
Answering NO to the question below will not allow cluster
traffic to use the fast ethernet port.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com