6 Features & Specifications
© Travis Industries 93508061 4150520
Freestanding in an Alcove
Freestanding in a Mobile Home
Masonry Fireplace Insert
NOTE: This fireplace insert is not approved for
Factory Built Z.C. (Metal) Fireplaces
3.1 Cubic Foot Firebox Volume
Single Operating Control
Accepts Logs Up to 24" Long
Steel Plate Construction (1/4" & 3/16")
Heavy Duty Refractory Firebrick
Optional High-Tech Blower
Approximate Maximum Heating Capacity (in square feet)* 1,500 to 2,500
Maximum BTU's per Hour (Cord Wood Calculation) 74,300
Overall Efficiency (Oregon Method) 70.0 %
Maximum Burn Time Up to 12 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
This model was not tested for efficiency however it is assigned a default efficiency of 63% by the EPA
under previous subpart AAA. Efficiency of this wood heater will be affected by the operational burn rate
and the moisture content of the wood used as fuel.
This heater meets the 2015 U.S. EPA’s crib wood emission limits for wood heaters sold after May 15,
2015. Tested to Method 28, 5H this heater has been shown to deliver heat at rates ranging from 12,00 to
45,100 BTU/hr and an emission value of 2.6g/h.
easure side, corner,
nd back clearances
rom the stove top. 29-3/8"
he flue collar
rotrudes 1" above
he stove top
For inserts, add 1" for the flue collar.
* See "Fireplace Requirements" for details
n fireplace insert installation.
With Legs 29-1/8
10 Lbs. with pedestal