Loading...
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 3
5
Troubleshooting
1. Place Display face down,
on a non-abrasive surface.
2. Remove Battery Cover.
a. Turn the phillips screw
counterclockwise.
b. Slide battery cover off.
3. Remove Battery and prop-
erly discard.
4. Install new 9 Volt battery.
5. Reinstall Battery cover.
a. Slide battery cover on.
b. Install phillips screw turning it clockwise.
Note: Do not overtighten screw.
Tool Self-Tests
Tool Self-Tests check the display, keys, and internal memory.
Refer to “System Setup” on page 3-6 of the manual for the operational
procedures for the Tool self-tests.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com