Loading...
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 13
4
Vehicle Diagnostics
Press the
UP
or
DOWN
arrow key
to review the data.
If data does not exist, a message
informs the user to run the Read Code
function before reviewing data.
3. To return to the prior menu,
press
BACK
.
Print Data
The Print Data function allows the printing of diagnostic information
stored in the Tool.
The Tool’s internal battery power can be used to print data.
Print Data is available from both the Main Menu and Diagnostic
Menu.
To use the Print Data function, you must install the PC Scanning Suite
software found at www.otctools.com/updates. Launch the Scanning
Suite and then start the printing application.
Follow all instructions on the PC.
1. Connect the Tool to your PC.
Take the USB cable and attach the Mini B Connector to the
Device Port on the Tool.
Attach the Host Connector to a USB Port on the personal computer
(PC).
No Data Stored In
Press BACK to Cont
Tool. Read Codes
Before Reviewing.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com