Loading...
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 5
4
Vehicle Diagnostics
This code indicates that you have
a current problem with the Net-
work Bus Communication for the
ABS controller and that the prob-
lem is illuminating the ABS mal-
function indicator lamp (MIL) on
the dashboard.
Erase Codes
The Erase Codes function deletes DTC data from the control modules.
Do not perform this function while the vehicle is in motion. The
Tool must be connected to the vehicle to run this function.
Perform Erase Codes function only after a system has been checked
completely and the DTCs have been written down or printed.
After servicing the vehicle, erase stored DTCs and verify that the codes
have been cleared. If a DTC returns, the problem has not been fixed or
other faults are present.
The vehicle may need to be driven to conclude that a fault is repaired.
From the Diagnostic Menu:
1. Select Erase Codes.
a. From the Diagnostic Menu,
press the
UP
or
DOWN
arrow key until Erase Codes is
highlighted.
b. Press
EN TER
.
If diagnostic results and codes are not
to be erased, select No .
Selecting No takes you back
to the Diagnostic Menu.
2. Erase the diagnostic results
and codes.
Press the LEFT arrow for Yes.
U2100
Controller Area
Network Bus
Communication
Current MIL Code
3 of 3
ABS
DIAGNOSTIC MENU
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Read Codes
Erase Codes
MIL Status
I/M Monitors ft
View Data
View Freeze Data
Erase?
==========================
Are you sure you
want to Erase
Diagnostic Results
and Codes?
YES NO
WORKING
Waiting for
Vehicle to Respond
Please Wait
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com