Loading...
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 35
Diagnostic Menu
4
Non-CAN Vehicles
=====================
ID 01
MOd $10
MAX 80
MEAS 00
MIN ----
Test $01
STS OK
On Non-CAN vehicles the Scan
Tool displays:
Test data (test ID)
Maximum value (MAX)
Test measurements (MEAS)
Minimum value (MIN)
Status (STS)
Measurements and
Specification values are
hexadecimal numbers (i.e.,
$1A, $FE, $11.)
Module (MOD)
OR
CAN Vehicles
=====================
RICH-LN Thresh
MOD: $10
MAX: -----(V)
MEAS: 0.555(V)
MIN: -----(V)
O2 Bank1 Sensor1
On CAN vehicles Scan Tool
displays:
Test performed. The test
performed can be $## if test is
not defined. Refer to vehicle
service manual for details.
Measured values and units of
measured (such as volts,
amps, and seconds).
Status of monitor test data.
Module ID where the monitor
test data came from.
3. Return to Select Test Menu.
•Press BACK key.
4. Return to Diagnostic Menu.
•Press BACK key.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com