Loading...
Using The Scan Tool
3 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
1.
=====================
I/M Monitors
DTCs (Codes)
State OBD Check
View Fre eze Data
02 Monitor Tests
Review Data
Recording
Select Recording.
•Use
UP
or
DOWN
arrow
key until Recording is
highlighted.
2. Play Back Recording.
ON
MIL STATUS
ABSLT TPS(%) 100
ENGINE SPEED(RPM) 688
CALC LOAD(%) 0
MAP ("HG) 30.7
FRAME:0 TM 0.0
Throttle Position
The Recording has frame
number and timestamp (in
seconds).
Negative frames and
timestamps indicate data
recorded before trigger event.
Positive frames and
timestamps indicate data
recorded after trigger event.
Use
UP
or
DOWN
arrow keys to view recorded PID data of
each frame.
Use LEFT or RIGHT arrow keys to scroll back and forth
through frames.
See Appendix A for PID Definitions.
=====================
O2 Bank1 Sensor1
ENG SPEED (RPM)
CALC LOAD (%)
MAF (LB/M)
Select PID to Graph
ABSLT TPS (%)
MAP ("Hg)
COOLANT ( F)
o
If graphing is available for
selected PID, the “ ” icon is
located on the side of the
screen.
27.7
FRAME: 0 TM: 0.0
ABS TPS (%) 27.8
28.2
Press ENTER to select
PIDS to graph. A maximum of
two PIDS can be graphed.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com