Loading...
Using The Scan Tool
3 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
The Scan Tool must be attached to the vehicle to perform
diagnostic functions. The Scan Tool disables the diagnostic
functions when powered from the internal batteries.
Each time the Scan Tool is
powered up, voltage of the
internal battery is checked.
=====================
Vehicle Diagnostics
Component Locator
Acronyms
Review Data
Main Menu
Print Data
Code Lookup
Vehicle Diagnostics
If voltage is low, the Low
Battery Symbol ( )
displays on screen.
Replace the battery using
instructions provided in
Battery Replacement.
!
CAUTION
If the Scan Tool will not be used for an extended
period of time, remove the batteries to prevent
battery leakage from damaging the battery
compartment.
Diagnostic
Connector
Vehicle Power
When the Scan Tool is connected to the
vehicle’s DLC, the tool is powered by the
vehicle and will automatically turn on once
connected.
USB Power
When the tool is connected to a Personal
Computer (PC) via the USB cable, the tool will automatically power up.
Refer to Scan Tool Does Not Power Up in section 5
Troubleshooting on page 5-1 if there are problems.
System Setup
System Setup allows:
Measurement units to be changed.
Display contrast to be changed.
Auto-Power off time to be changed.
Print Header to be turned ON or OFF.
Scan Tool information to be viewed.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com