Loading...
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 3
Using The Scan Tool
3
Characters used to help operate the Scan Tool are:
Indicates information is available for an item or multiple items.
Indicates additional information is available on previous screen
by using the
UP
arrow key.
Indicates additional information is available on next screen by
using
the
DOWN
arrow key.
Indicates internal batteries need replacing or are not installed.
C
o
d
e
Indicates CodeConnect® Key is active.
Indicates graphical viewing available.
Keypad
The keypad is used to move through the different menus of the Scan
Tool. The Scan Tool’s software is designed for ease in operating and
navigating through menus.
!
CAUTION
Do not use solvents such as alcohol to clean keypad
or display. Use a mild nonabrasive detergent and a
soft cotton cloth.
!
CAUTION
Do not soak keypad as water might find its way
inside the Scan Tool.
Power
Internal Battery
Battery power is not required to use tool.
ON/OFF
button on Scan Tool turns tool on and off.
Press and hold
ON/OFF
key for at least 1 second to turn on
Scan Tool.
The Scan Tool will automatically turn OFF after a user-selectable
period of inactivity when powered from the internal batteries. The
default is 2 minutes.
When powered from the internal batteries, the Scan Tool turns off
the backlighting for the display if no key presses are made during
a 1-minute period.
If a key is pressed prior to the Scan Tool powering off, the
backlighting for the display will turn back on.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com