Loading...
35
CASTING ASSEMBLY
FIG.11
Using two people, lower the top cover
assembly carefully onto base and attach as shown.
Push wiring harness and hose assembly through front
of cart assembly ensuring it goes between heat shield
and front panel opening.
WARNING
!
DO NOT PASS HOSE
BEHIND THE HEAT
SHIELD IMPORTANT
!
DIRECT THE HOSE AND
HARNESS TO THE
FRONT OF THE HEAT
SHIELD AS SHOWN IMPORTANT
!
DIRECT THE HOSE AND
HARNESS TO THE
FRONT OF THE HEAT
SHIELD AS SHOWN
SP86-18 (4) 1/4" -20 X .75"
MACHINE SCREW
SP53-16 (4) 1/4-20
NUT HEX HD FLANGED
WARNING
!
FAILURE TO ENSURE THE ABOVE MAY RESULT
IN HAZARDOUS FIRE OR EXPLOSION CAUSING
SERIOUS BODILY INJURY AND/OR PROPERTY
DAMAGE AND INVALIDATES WARRANTY
DANGER
!
DANGER: DO NOT PASS HOSE ABOVE SHIELD HOSE MUST NOT
TOUCH ANY PART OF THE BASE
WARNING:
ENSURE HOSE ASSEMBLY DOES NOT CONTACT THE
CASTING, OR ANY OTHER PARTS WHICH WILL GET HOT.
!
NOTE
NATURAL GAS OR
PROPANE HOSE
(TYPE DEPENDANT
UPON MODEL
PURCHASED)
IMPORTANT
CENTER TABS
UNDER COVER
ASSEMBLY
WITH NOTCHES
IN CABINET.
SP86-18 (4)
1/4" -20 X .75"
MACHINE SCREW
SP53-16 (4) 1/4-20
NUT HEX HD FLANGED
HOSE
ASSEMBLY
WIRING
HARNESS
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com